========== /dev/sdh ========== smartctl 7.5 2025-04-30 r5714 [x86_64-linux-7.0.0-27-generic] (local build) Copyright (C) 2002-25, Bruce Allen, Christian Franke, www.smartmontools.org === START OF INFORMATION SECTION === Vendor: NETAPP Product: X388_SEVNE16TA07 Revision: NA03 Compliance: SPC-5 User Capacity: 16,000,900,661,248 bytes [16.0 TB] Logical block size: 512 bytes Physical block size: 4096 bytes LU is fully provisioned Rotation Rate: 7200 rpm Form Factor: 3.5 inches Logical Unit id: 0x5000c500cadecaf3 Serial number: ZL29M829 Device type: disk Transport protocol: SAS (SPL-4) Local Time is: Mon Jul 6 05:33:51 2026 UTC SMART support is: Available - device has SMART capability. SMART support is: Enabled Temperature Warning: Enabled ----- SMART Health & Attributes ----- smartctl 7.5 2025-04-30 r5714 [x86_64-linux-7.0.0-27-generic] (local build) Copyright (C) 2002-25, Bruce Allen, Christian Franke, www.smartmontools.org === START OF READ SMART DATA SECTION === SMART Health Status: OK Grown defects during certification = 0 Total blocks reassigned during format = 0 Total new blocks reassigned = 0 Power on minutes since format = 5831 Current Drive Temperature: 26 C Drive Trip Temperature: 40 C Accumulated power on time, hours:minutes 34689:52 Manufactured in week 41 of year 2020 Specified cycle count over device lifetime: 50000 Accumulated start-stop cycles: 25 Specified load-unload count over device lifetime: 600000 Accumulated load-unload cycles: 1535 Elements in grown defect list: 0 ----- Extended SMART (error log, self-test log, device statistics) ----- smartctl 7.5 2025-04-30 r5714 [x86_64-linux-7.0.0-27-generic] (local build) Copyright (C) 2002-25, Bruce Allen, Christian Franke, www.smartmontools.org === START OF INFORMATION SECTION === Vendor: NETAPP Product: X388_SEVNE16TA07 Revision: NA03 Compliance: SPC-5 User Capacity: 16,000,900,661,248 bytes [16.0 TB] Logical block size: 512 bytes Physical block size: 4096 bytes LU is fully provisioned Rotation Rate: 7200 rpm Form Factor: 3.5 inches Logical Unit id: 0x5000c500cadecaf3 Serial number: ZL29M829 Device type: disk Transport protocol: SAS (SPL-4) Local Time is: Mon Jul 6 05:33:52 2026 UTC SMART support is: Available - device has SMART capability. SMART support is: Enabled Temperature Warning: Enabled Read Cache is: Enabled Writeback Cache is: Disabled === START OF READ SMART DATA SECTION === SMART Health Status: OK Grown defects during certification = 0 Total blocks reassigned during format = 0 Total new blocks reassigned = 0 Power on minutes since format = 5831 Current temperature = 26 Lifetime maximum temperature = 47 Lifetime minimum temperature = 14 Maximum temperature since power on = 26 Minimum temperature since power on = 17 Relative humidity = 0 Lifetime maximum relative humidity = 0 Lifetime minimum relative humidity = 0 Maximum relative humidity since power on = 0 Minimum relative humidity since power on = 0 Manufactured in week 41 of year 2020 Specified cycle count over device lifetime: 50000 Accumulated start-stop cycles: 25 Specified load-unload count over device lifetime: 600000 Accumulated load-unload cycles: 1535 Elements in grown defect list: 0 Error counter log: Errors Corrected by Total Correction Gigabytes Total ECC rereads/ errors algorithm processed uncorrected fast | delayed rewrites corrected invocations [10^9 bytes] errors read: 0 0 0 0 0 642983.387 0 write: 0 0 0 0 0 115387.231 0 verify: 0 0 0 0 0 76784.659 0 Non-medium error count: 3 Pending defect count:0 Pending Defects SMART Self-test log Num Test Status segment LifeTime LBA_first_err [SK ASC ASQ] Description number (hours) # 1 Background short Completed - 34689 - [- - -] # 2 Background short Completed - 34639 - [- - -] Long (extended) Self-test duration: 6 seconds [0.1 minutes] Background scan results log Status: no scans active Accumulated power on time, hours:minutes 34689:52 [2081392 minutes] Number of background scans performed: 0, scan progress: 0.00% Number of background medium scans performed: 0 General statistics and performance log page: General access statistics and performance: Number of read commands: 1997 Number of write commands: 18 number of logical blocks received: 14368 number of logical blocks transmitted: 212281 read command processing intervals: 10 in seconds: 600.000 write command processing intervals: 2 in seconds: 120.000 weighted number of read commands plus write commands: 0 weighted read command processing plus write command processing: 0 Idle time: Idle time intervals: 53 in seconds: 3180.000 Protocol Specific port log page for SAS SSP relative target port id = 1 generation code = 2 number of phys = 1 phy identifier = 0 attached device type: expander device attached reason: SMP phy control function reason: loss of dword synchronization negotiated logical link rate: phy enabled; 12 Gbps attached initiator port: ssp=0 stp=0 smp=0 attached target port: ssp=0 stp=0 smp=1 SAS address = 0x5000c500cadecaf1 attached SAS address = 0x500304802116027f attached phy identifier = 7 Invalid DWORD count = 0 Running disparity error count = 0 Loss of DWORD synchronization count = 4 Phy reset problem count = 0 relative target port id = 2 generation code = 2 number of phys = 1 phy identifier = 1 attached device type: no device attached attached reason: unknown reason: unknown negotiated logical link rate: phy enabled; unknown attached initiator port: ssp=0 stp=0 smp=0 attached target port: ssp=0 stp=0 smp=0 SAS address = 0x5000c500cadecaf2 attached SAS address = 0x0 attached phy identifier = 0 Invalid DWORD count = 0 Running disparity error count = 0 Loss of DWORD synchronization count = 4 Phy reset problem count = 0