========== /dev/sda ==========

smartctl 7.5 2025-04-30 r5714 [x86_64-linux-7.0.0-27-generic] (local build)
Copyright (C) 2002-25, Bruce Allen, Christian Franke, www.smartmontools.org

=== START OF INFORMATION SECTION ===
Vendor:               HP
Product:              MB014000JWTFD
Revision:             HPD3
Compliance:           SPC-4
User Capacity:        14,000,519,643,136 bytes [14.0 TB]
Logical block size:   512 bytes
Physical block size:  4096 bytes
Rotation Rate:        7200 rpm
Form Factor:          3.5 inches
Logical Unit id:      0x5000039a883afb81
Serial number:        Y0H0A01JFMTG
Device type:          disk
Transport protocol:   SAS (SPL-4)
Local Time is:        Mon Jul  6 05:33:47 2026 UTC
SMART support is:     Available - device has SMART capability.
SMART support is:     Enabled
Temperature Warning:  Enabled


----- SMART Health & Attributes -----
smartctl 7.5 2025-04-30 r5714 [x86_64-linux-7.0.0-27-generic] (local build)
Copyright (C) 2002-25, Bruce Allen, Christian Franke, www.smartmontools.org

=== START OF READ SMART DATA SECTION ===
SMART Health Status: OK

Current Drive Temperature:     23 C
Drive Trip Temperature:        60 C

Accumulated power on time, hours:minutes 44456:17
Manufactured in week 47 of year 2020
Specified cycle count over device lifetime:  50000
Accumulated start-stop cycles:  36
Specified load-unload count over device lifetime:  600000
Accumulated load-unload cycles:  36
Elements in grown defect list: 0


----- Extended SMART (error log, self-test log, device statistics) -----
smartctl 7.5 2025-04-30 r5714 [x86_64-linux-7.0.0-27-generic] (local build)
Copyright (C) 2002-25, Bruce Allen, Christian Franke, www.smartmontools.org

=== START OF INFORMATION SECTION ===
Vendor:               HP
Product:              MB014000JWTFD
Revision:             HPD3
Compliance:           SPC-4
User Capacity:        14,000,519,643,136 bytes [14.0 TB]
Logical block size:   512 bytes
Physical block size:  4096 bytes
Rotation Rate:        7200 rpm
Form Factor:          3.5 inches
Logical Unit id:      0x5000039a883afb81
Serial number:        Y0H0A01JFMTG
Device type:          disk
Transport protocol:   SAS (SPL-4)
Local Time is:        Mon Jul  6 05:33:47 2026 UTC
SMART support is:     Available - device has SMART capability.
SMART support is:     Enabled
Temperature Warning:  Enabled
Read Cache is:        Enabled
Writeback Cache is:   Disabled

=== START OF READ SMART DATA SECTION ===
SMART Health Status: OK

Current Drive Temperature:     23 C
Drive Trip Temperature:        60 C

Manufactured in week 47 of year 2020
Specified cycle count over device lifetime:  50000
Accumulated start-stop cycles:  36
Specified load-unload count over device lifetime:  600000
Accumulated load-unload cycles:  36
Elements in grown defect list: 0

Error counter log:
           Errors Corrected by           Total   Correction     Gigabytes    Total
               ECC          rereads/    errors   algorithm      processed    uncorrected
           fast | delayed   rewrites  corrected  invocations   [10^9 bytes]  errors
read:          0        1         0         0          0    1508509.850           0
write:         0        1         0         0          0     240863.891           0

Non-medium error count:      144

SMART Self-test log
Num  Test              Status                 segment  LifeTime  LBA_first_err [SK ASC ASQ]
     Description                              number   (hours)
# 1  Background short  Completed                   -   44455                 - [-   -    -]
# 2  Background short  Completed                   -   44405                 - [-   -    -]

Long (extended) Self-test duration: 88200 seconds [24.5 hours]

Background scan results log
  Status: halted due to temperature out of range
    Accumulated power on time, hours:minutes 44456:17 [2667377 minutes]
    Number of background scans performed: 79,  scan progress: 20.80%
    Number of background medium scans performed: 79
Device does not support General statistics and performance logging

Protocol Specific port log page for SAS SSP
relative target port id = 1
  generation code = 2
  number of phys = 1
  phy identifier = 0
    attached device type: expander device
    attached reason: SMP phy control function
    reason: loss of dword synchronization
    negotiated logical link rate: phy enabled; 12 Gbps
    attached initiator port: ssp=0 stp=0 smp=0
    attached target port: ssp=0 stp=0 smp=1
    SAS address = 0x5000039a883afb82
    attached SAS address = 0x500304802116027f
    attached phy identifier = 0
    Invalid DWORD count = 81
    Running disparity error count = 81
    Loss of DWORD synchronization count = 10
    Phy reset problem count = 0
    Phy event descriptors:
     Elasticity buffer overflow count: 0
     Received abandon-class OPEN_REJECT count: 0
     Transmitted BREAK count: 0
     Received BREAK count: 1
     Transmitted SSP frame error count: 0
     Received SSP frame error count: 0
relative target port id = 2
  generation code = 2
  number of phys = 1
  phy identifier = 1
    attached device type: no device attached
    attached reason: unknown
    reason: unknown
    negotiated logical link rate: phy enabled; unknown
    attached initiator port: ssp=0 stp=0 smp=0
    attached target port: ssp=0 stp=0 smp=0
    SAS address = 0x5000039a883afb83
    attached SAS address = 0x0
    attached phy identifier = 0
    Invalid DWORD count = 0
    Running disparity error count = 0
    Loss of DWORD synchronization count = 0
    Phy reset problem count = 0
    Phy event descriptors:
     Elasticity buffer overflow count: 0
     Received abandon-class OPEN_REJECT count: 0
     Transmitted BREAK count: 0
     Received BREAK count: 0
     Transmitted SSP frame error count: 0
     Received SSP frame error count: 0