========== /dev/sdf ========== smartctl 7.5 2025-04-30 r5714 [x86_64-linux-7.0.0-27-generic] (local build) Copyright (C) 2002-25, Bruce Allen, Christian Franke, www.smartmontools.org === START OF INFORMATION SECTION === Vendor: NETAPP Product: X377_STATE10TA07 Revision: NA00 Compliance: SPC-4 User Capacity: 10,000,831,348,736 bytes [10.0 TB] Logical block size: 512 bytes Physical block size: 4096 bytes LU is fully provisioned Rotation Rate: 7200 rpm Form Factor: 3.5 inches Logical Unit id: 0x5000c500ca0a5843 Serial number: ZA2D33ES Device type: disk Transport protocol: SAS (SPL-4) Local Time is: Mon Jul 6 05:33:49 2026 UTC SMART support is: Available - device has SMART capability. SMART support is: Enabled Temperature Warning: Enabled ----- SMART Health & Attributes ----- smartctl 7.5 2025-04-30 r5714 [x86_64-linux-7.0.0-27-generic] (local build) Copyright (C) 2002-25, Bruce Allen, Christian Franke, www.smartmontools.org === START OF READ SMART DATA SECTION === SMART Health Status: OK Grown defects during certification = 0 Total blocks reassigned during format = 2 Total new blocks reassigned = 0 Power on minutes since format = 5831 Current Drive Temperature: 26 C Drive Trip Temperature: 40 C Accumulated power on time, hours:minutes 36360:44 Manufactured in week 15 of year 2020 Specified cycle count over device lifetime: 10000 Accumulated start-stop cycles: 133 Specified load-unload count over device lifetime: 300000 Accumulated load-unload cycles: 1550 Elements in grown defect list: 2 ----- Extended SMART (error log, self-test log, device statistics) ----- smartctl 7.5 2025-04-30 r5714 [x86_64-linux-7.0.0-27-generic] (local build) Copyright (C) 2002-25, Bruce Allen, Christian Franke, www.smartmontools.org === START OF INFORMATION SECTION === Vendor: NETAPP Product: X377_STATE10TA07 Revision: NA00 Compliance: SPC-4 User Capacity: 10,000,831,348,736 bytes [10.0 TB] Logical block size: 512 bytes Physical block size: 4096 bytes LU is fully provisioned Rotation Rate: 7200 rpm Form Factor: 3.5 inches Logical Unit id: 0x5000c500ca0a5843 Serial number: ZA2D33ES Device type: disk Transport protocol: SAS (SPL-4) Local Time is: Mon Jul 6 05:33:50 2026 UTC SMART support is: Available - device has SMART capability. SMART support is: Enabled Temperature Warning: Enabled Read Cache is: Enabled Writeback Cache is: Disabled === START OF READ SMART DATA SECTION === SMART Health Status: OK Grown defects during certification = 0 Total blocks reassigned during format = 2 Total new blocks reassigned = 0 Power on minutes since format = 5831 Current Drive Temperature: 26 C Drive Trip Temperature: 40 C Manufactured in week 15 of year 2020 Specified cycle count over device lifetime: 10000 Accumulated start-stop cycles: 133 Specified load-unload count over device lifetime: 300000 Accumulated load-unload cycles: 1550 Elements in grown defect list: 2 Error counter log: Errors Corrected by Total Correction Gigabytes Total ECC rereads/ errors algorithm processed uncorrected fast | delayed rewrites corrected invocations [10^9 bytes] errors read: 2459169398 0 0 2459169398 0 2011974.306 0 write: 0 0 0 0 0 37100.051 0 verify: 1348352988 0 0 1348352988 0 113775.818 0 Non-medium error count: 388 SMART Self-test log Num Test Status segment LifeTime LBA_first_err [SK ASC ASQ] Description number (hours) # 1 Background short Completed - 36360 - [- - -] # 2 Background short Completed - 36309 - [- - -] Long (extended) Self-test duration: 56880 seconds [15.8 hours] Background scan results log Status: no scans active Accumulated power on time, hours:minutes 36360:44 [2181644 minutes] Number of background scans performed: 0, scan progress: 0.00% Number of background medium scans performed: 0 Device does not support General statistics and performance logging Protocol Specific port log page for SAS SSP relative target port id = 1 generation code = 2 number of phys = 1 phy identifier = 0 attached device type: expander device attached reason: SMP phy control function reason: unknown negotiated logical link rate: phy enabled; 12 Gbps attached initiator port: ssp=0 stp=0 smp=0 attached target port: ssp=0 stp=0 smp=1 SAS address = 0x5000c500ca0a5841 attached SAS address = 0x500304802116027f attached phy identifier = 5 Invalid DWORD count = 0 Running disparity error count = 0 Loss of DWORD synchronization count = 7 Phy reset problem count = 11 relative target port id = 2 generation code = 2 number of phys = 1 phy identifier = 1 attached device type: no device attached attached reason: unknown reason: unknown negotiated logical link rate: phy enabled; unknown attached initiator port: ssp=0 stp=0 smp=0 attached target port: ssp=0 stp=0 smp=0 SAS address = 0x5000c500ca0a5842 attached SAS address = 0x0 attached phy identifier = 0 Invalid DWORD count = 0 Running disparity error count = 0 Loss of DWORD synchronization count = 0 Phy reset problem count = 2